进口芯片与替料专业采购平台     
网站首页 > 商城快报> TUSB2046IBVF TUSB2046IBVFR 4-Port USB Hub W/Optional Serial EEPROM Interface www.yhx-group.com

TUSB2046IBVF TUSB2046IBVFR 4-Port USB Hub W/Optional Serial EEPROM Interface www.yhx-group.com

信息来源 : 网络 | 发布时间 : 2017-09-13 11:20 | 浏览次数 : 527

烨弘轩电子最新到货 有最新批号 朱生 13410068358 微信同号 可提供样品 批量 方案 技术资料 技术支持 竭诚为您提供优质服务。需要查询更多产品 www.yhx-group.com 。

 TUSB2046IBVF  TUSB2046IBVFR     4-Port USB Hub W/Optional Serial EEPROM Interface  有现货 可添加我们联系方式获取最优惠价格

原厂原包原标原装每一片都来自正规渠道每一片都可追溯

描述

The TUSB2046x is a 3.3-V CMOS hub device that provides one upstream port and four downstream ports in compliance with the Universal Serial Bus (USB) specification as a full-speed hub. Because this device is implemented with a digital state machine instead of a microcontroller, no firmware
programming is required. Fully compliant USB transceivers are integrated into the ASIC for all upstream and downstream ports. The downstream ports support full-speed and low-speed devices by automatically setting the slew rate according to the speed of the device attached to the ports. The configuration of the BUSPWR pin selects either the bus-powered or the self-powered mode.

Configuring the GANGED input determines the power switching and overcurrent detection modes for the downstream ports. If GANGED is high, all PWRON outputs switch together and if any OVRCUR is activated, all ports transition to the power-off state. If GANGED is low, the PWRON outputs and OVRCUR inputs operate on a per-port basis.

The TUSB2046x provides the flexibility of using a 6-MHz or a 48-MHz clock. The logic level of the TSTMODE terminal controls the selection of the clock source. When TSTMODE is low, the output of the internal APLL circuitry is selected to drive the internal core of the device. When TSTMODE is high, the TSTPLL/48MCLK input is selected as the input clock source and the APLL circuitry is powered down and bypassed. The internal oscillator cell is also powered down while TSTMODE is high. Low EMI emission is achieved because the TUSB2046x can usee a 6-MHz crystal input. Connect the crystal as shown in Figure 6. An internal PLL then generates the 48-MHz clock used to sample data from the upstream port and to synchronize the 12 MHz used for the USB clock. If low-power suspend and resume are desired, a passive crystal or resonator must be used. However, a 6-MHz oscillator may be used by connecting the output to the XTAL1 pin and leaving the XTAL2 pin open. The oscillator TTL output must not exceed 3.6 V.

For 48-MHz operation, the clock cannot be generated with a crystal using the XTAL2 output because the internal oscillator cell supports only the fundamental frequency. Other useful features of the TUSB2046x include a package with a 0.8-mm pin pitch for easy PCB routing and assembly, push-pull outputs for the PWRON pins eliminate the need for pullup resistors required by traditional open-collector I/Os, andOVRCUR pins have noise filtering for increased immunity to voltage spikes.


特性

  • Fully Compliant With the USB Specification as a Full-Speed Hub: TID #30220231

  • 32-Pin LQFP (1) Package With a 0.8-mm Terminal Pitch or QFN Package With a 0.5-mm Pin Pitch

  • 3.3-V Low-Power ASIC Logic

  • Integrated USB Transceivers

  • State Machine Implementation Requires No Firmware Programming

  • One Upstream Port and Four Downstream Ports

  • All Downstream Ports Support Full-Speed and Low-Speed Operations

  • Two Power Source Modes

    • Self-Powered Mode

    • Bus-Powered Mode

  • Power Switching and Overcurrent Reporting Is Provided Ganged or Per Port

  • Supports Suspend and Resume Operations

  • Supports Programmable Vendor ID and Product ID With External Serial EEPROM

  • 3-State EEPROM Interface Allows EEPROM Sharing

  • Push-Pull Outputs for PWRON Eliminate the Need for External Pullup Resistors

  • Noise Filtering on OVRCUR Provides Immunity to Voltage Spikes

  • Package Pinout Allows 2-Layer PCB

  • Low EMI Emission Achieved by a 6-MHz Crystal Input

  • Migrated From Proven TUSB2040 Hub

  • Lower Cost Than the TUSB2040 Hub

  • Enhanced System ESD Performance

  • No Special Driver Requirements; Works Seamlessly With Any Operating System With USB Stack Support

  • Supports 6-MHz Operation Through a Crystal Input or a 48-MHz Input Clock


深圳市烨弘轩电子有限公司,我司2011年成立于中国经济特区深圳.我司专注于为全球电子企业提供优质的电子零件供应服务,竭力打造全球品牌元器件零售与批量供应中心。专业经营各类电子元器件(集成电路IC,存储芯片,分立器件,电源,无源元件,连接器,继电器,传感器,光电子,开关,保险元件,紧固件,开发工具,变压器,测试与测量等)。 我们以低成本提供全方位一站式电子元件供应链采购方案,包括但不仅限于电子元件紧急物料搜寻,电子元件齐套供应、电子元件降低成本的长期供应,库存寄售等一系列供应链解决方案。优势供应各类电子组件.

==================

深圳市烨弘轩电子有限公司 重点客户遍布中国内地 港 澳 台地区,另外欧美发达国家以及 一代一路沿线发展中国家我司也有大量长期合作的优质客户。

==================

深圳市烨弘轩电子有限公司 为一般纳税人 可开具17%增值税票   有合作基础可申请月结,延长账期等多种供货付款方式。

==================

公司经营目标:整合全球资源全 芯 全意为您服务。

公司服务宗旨:客户虐我千百遍,我待客户如初恋。

==================

主营 :  主动电子元器件 集成电路 IC 芯片 (AD TI  MAX NXP ST LT XILINX ALTERA)等。

==================

联系方式: 您可以通过下面任意一种方式 联系到我们

企业网站:www.yhx-group.com  

shype: pretying 

阿里旺旺:cd_prety

微信号:yihuazhu666 

销售经理:朱宜华    深圳市烨弘轩电子有限公司   深圳市福田区上步工业区204栋5楼东座516室 

电话:  0755-82548684 多线 

传真:  0755-82523504   

手机:  13410068358   

QQ  :  746277983 1520285168 

微信号:  yihuazhu666 

邮箱:   zyh1818118@126.com

==================

烨弘轩电子郑重承诺:

我司所售物料 可提供样品 批量 方案 技术资料 技术支持。所有物料都是 原厂原包原标原装,每一片都来自正规渠道,每一片都可追溯。


该信息来源于网络,如有侵权,请及时与我们联系
  • 0755-82548684
  • 0755-82529130
  • 关注官方价格发布微信号
  • 暂没浏览记录!