烨弘轩电子最新到货 有最新批号 朱生 13410068358 微信同号 可提供样品 批量 方案 技术资料 技术支持 竭诚为您提供优质服务。需要查询更多产品 www.yhx-group.com 。

TPS65381AQDAPRQ1  TPS65381AQDAPTQ1    有现货 可添加我们联系方式获取最优惠价格

原厂原包原标原装每一片都来自正规渠道每一片都可追溯

描述

The TPS65381A-Q1 device is a multirail power supply designed to supply microcontrollers (MCUs) in safety-relevant applications, such as those found in automotive and industrial markets. The device supports Texas Instruments’ Hercules™ TMS570 MCU and C2000™ MCU families, and various other MCUs with dual-core lockstep (LS) or loosely-coupled architectures (LC).

The TPS65381A-Q1 device integrates multiple supply rails to power the MCU, controller area network (CAN), or FlexRay, and an external sensor. An asynchronous-buck switch-mode power-supply converter with an internal FET converts the input supply (battery) voltage to a 6-V preregulator output. This 6-V preregulator supplies the other regulators. The device supports wakeup from IGNITION or wakeup from the CAN transceiver.

The integrated, fixed 5-V linear regulator with internal FET can be used for a CAN or FlexRay transceiver supply for example. A second linear regulator, also with an internal FET, regulates to a selectable 5-V or 3.3-V output which, for example, can be use for the MCU I/O voltage.

The TPS65381A-Q1 device includes an adjustable linear-regulator controller, requiring an external FET and resistor divider, that regulates to an adjustable voltage of between 0.8 V and 3.3 V which may be used for the MCU core supply.

The integrated sensor supply can be run in tracking mode or adjustable output mode and includes short-to-ground and short-to-battery protection. Therefore, this regulator can power a sensor outside the module or electronic control unit (ECU).

The integrated charge pump provides overdrive voltage for the internal regulators. The charge pump can also be used in a reverse-battery protection circuit by using the charge-pump output to control an external NMOS transistor. This solution allows for a lower minimum-battery-voltage operation compared to a traditional reverse-battery blocking diode when the device must be operational at the lowest possible supply voltages.

The device monitors undervoltage and overvoltage on all regulator outputs, battery voltage, and internal supply rails. A second bandgap reference, independent from the main bandgap reference, is used for the undervoltage and overvoltage monitoring, to avoid any drifts in the main bandgap reference from being undetected. In addition, regulator current-limits and temperature protections are implemented.

The TPS65381A-Q1 device has monitoring and protection functions, which include the following: watchdog with trigger and question and answer modes, MCU error-signal monitor, clock monitoring on internal oscillators, self-check on the clock monitor, cyclic redundancy check (CRC) on nonvolatile memory, a diagnostic output pin allowing the MCU to observe internal analog and digital signals of the device, a reset circuit and output pin for the MCU, and an enable drive output to disable the safing-path or external-power stages on detected faults. A built-in self-test (BIST) monitors the device functionality automatically at power-up. A dedicated DIAGNOSTIC state allows the MCU to check TPS65381A-Q1 monitoring and protection functions.

The TPS65381A-Q1 device is offered in a 32-pin HTSSOP PowerPAD package.

特性

• Qualified for Automotive Applications

• AEC-Q100 Qualified With the Following Results:

• Device Temperature Grade 1: –40°C to +125°C Ambient Operating Temperature

• Device HBM ESD Classification Level H2

• Device CDM ESD Classification Level C3B

• Multirail Power Supply Supporting Among Others

• TI Hercules™ TMS570, C2000™, and Various Functional-Safety Architecture Microcontrollers

• Supply Rails

• 5.8 V to 36 V (CAN, I/O, MCU Core, and Sensor-Supply Regulators Functional)

• 4.5 V to 5.8 V (3.3 V I/O and MCU Core Regulators Functional)

• Input voltage range:

• 6-V Asynchronous Switch Mode Preregulator With Internal FET, 1.3-A Output Current

• 5-V (CAN) Supply Voltage, Linear Regulator With Internal FET, 300-mA Output Current

• 3.3-V or 5-V (MCU I/O) Voltage, Linear Regulator With Internal FET, 300-mA Output Current

• 0.8-V to 3.3-V Adjustable (MCU Core Voltage), Linear Regulator Controller With External FET

• 3.3-V to 9.5-V Adjustable Sensor Supply: Linear Tracking Regulator With Internal FET, 100-mA Output Current, and Protection Against Short-to-Supply and Short-to-Ground

• Charge Pump: Typically 12 V Above Battery Voltage

• Power Supply and System Monitoring

• Independent Undervoltage and Overvoltage Monitoring on All Regulator Outputs, Battery Voltage, and Internal Supplies

• Independent Voltage References for Regulator References and Voltage Monitoring. Voltage-Monitoring Circuitry With Independent Bandgap Reference and Separate Supply Input Pin

• Self-Check on all Voltage Monitoring (Automatic During Power-Up and After Power-Up Initiated by External MCU)

• All Supplies With Internal FETs Protected With Current-Limit and Overtemperature Shutdown

• Microcontroller (MCU) Interface

• Watchdog: Trigger Mode (OPEN/CLOSE Window) or Question and Answer Mode

• MCU Error-Signal Monitor For Lock-Step Dual-Core MCUs Including Hercules™ TMS570, C2000™, and Various Functional-Safety Architecture MCUs Using Pulse-Width Modulation (PWM) Error Output

• DIAGNOSTIC State for Performing Device Self-Tests, Diagnostics, and External Interconnect Checks

• SAFE State for Device and System Protection on Error Event Detection

• Clock Monitor for Internal Oscillator

• Self-Tests for Analog- and Digital-Critical Circuits Executed With Every Device Power Up or Activated by MCU in DIAGNOSTIC State

• CRC on Nonvolatile Memory, Device and Configuration Registers

• Reset Circuit and Output Pin for MCU

• Diagnostic Output Pin Allowing MCU to Observe Through a Multiplexer Internal Analog and Digital Signals of the Device

• Serial Peripheral Interface (SPI)

• Configuration Registers

• Watchdog Question and Answers

• Diagnostic Status Readout

• Compliant With 3.3-V and 5-V Logic Levels

• Enable Drive Output for Disabling Safing-Path or External Power-Stages on Detected System-Failure

• Wakeup Through IGNITION Pin or CAN WAKEUP Pin

• Package: 32-Pin HTSSOP PowerPAD™ IC Package

深圳市烨弘轩电子有限公司，我司2011年成立于中国经济特区深圳.我司专注于为全球电子企业提供优质的电子零件供应服务，竭力打造全球品牌元器件零售与批量供应中心。专业经营各类电子元器件（集成电路IC，存储芯片，分立器件,电源,无源元件,连接器,继电器,传感器,光电子,开关,保险元件,紧固件,开发工具,变压器,测试与测量等）。 我们以低成本提供全方位一站式电子元件供应链采购方案，包括但不仅限于电子元件紧急物料搜寻，电子元件齐套供应、电子元件降低成本的长期供应，库存寄售等一系列供应链解决方案。优势供应各类电子组件.

==================

深圳市烨弘轩电子有限公司 重点客户遍布中国内地 港 澳 台地区，另外欧美发达国家以及 一代一路沿线发展中国家我司也有大量长期合作的优质客户。

==================

深圳市烨弘轩电子有限公司 为一般纳税人 可开具17%增值税票   有合作基础可申请月结，延长账期等多种供货付款方式。

==================

公司经营目标：整合全球资源全 芯 全意为您服务。

公司服务宗旨：客户虐我千百遍，我待客户如初恋。

==================

主营 :  主动电子元器件 集成电路 IC 芯片 （AD TI  MAX NXP ST LT XILINX ALTERA）等。

==================

联系方式: 您可以通过下面任意一种方式 联系到我们

企业网站：www.yhx-group.com  

shype： pretying 

阿里旺旺：cd_prety

微信号：yihuazhu666 

销售经理：朱宜华    深圳市烨弘轩电子有限公司   深圳市福田区上步工业区204栋5楼东座516室 

电话:  0755-82548684 多线 

传真:  0755-82523504   

手机:  13410068358   

QQ  :  746277983 1520285168 

微信号:  yihuazhu666 

邮箱:   zyh1818118@126.com

==================

烨弘轩电子郑重承诺：

我司所售物料 可提供样品 批量 方案 技术资料 技术支持。所有物料都是 原厂原包原标原装，每一片都来自正规渠道，每一片都可追溯。